Static and Dynamic Behavior of High- and Ultrahigh-Performance Fiber-Reinforced Concrete Precast Bridge Parapets

Abstract

New designs of precast bridge parapets made with fiber-reinforced concrete (FRC) were developed using nonlinear finite-element calculations. Specific properties of high- and ultrahigh-performance FRC were exploited in these designs. The conventional reinforcement required in the FRC precast parapets varied from 0 to 50% when compared with a reference built-on-site parapet. An extensive experimental program was carried out to verify the performance of the FRC precast parapets. The parapet mechanical behavior was established under quasi-static tests and under dynamic loading replicating a vehicle impact. The results of the quasi-static tests indicate that precast FRC parapets possess the required strength and have ductility comparable to reference parapets. Quasi-static tests carried out after the dynamic tests indicate that the residual strength of the parapets corresponds to 75 to 100% of their original capacity. The finite-element model adopted in the project satisfactorily reproduced the strength, stiffness, and failure mode of the parapets. Finally, the system efficiency of precast FRC parapets was established for their application in a typical urban bridge project, considering the mechanical performance, the fabrication costs, and the required installation time.