Show simple item record

dc.contributor.authorN. K. Samadhiya
dc.contributor.authorM. N. Viladkar
dc.contributor.authorMoataz A. Al-Obaydi
dc.date.accessioned2017-05-08T21:32:07Z
dc.date.available2017-05-08T21:32:07Z
dc.date.copyrightNovember 2008
dc.date.issued2008
dc.identifier.other%28asce%291532-3641%282008%298%3A6%28327%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/55173
dc.description.abstractMajor civil engineering structures are being constructed now a days in complex geological environment with faults, shear zones, and other major discontinuities. These major discontinuities can cause a variety of problems in both surface and underground constructions. Unfavorably dipping major discontinuities may create unstable conditions in underground openings and contribute to the deformations of a rock mass under external static loading. Hence, rock–structure interaction analysis should simulate arbitrarily oriented rough and undulating major discontinuities within the rock mass, as well as the undulating interface along the structure and the rock mass such as dam foundations and underground excavations intersected by fault/shear zones. Realistic simulation of the mechanical behavior of rock joints is a prerequisite for successful numerical modeling of discontinuous rocks. When joint modeling is designed to include different degrees of joint roughness, dilation, and aperture, then realistic response depends upon the appropriate constitutive models and the way these parameters interact with stress change. Due to low values of the normal and tangential module, a unique characteristic of a rock discontinuity is that dilation may occur as soon as relative slip takes place and this may significantly alter the stress distribution, particularly around an underground excavation. In view of these practical requirements, a generalized formulation of a three-dimensional joint/interface element has been proposed here to account for dilatancy, roughness, and undulating surface of discontinuities.
dc.publisherAmerican Society of Civil Engineers
dc.titleThree-Dimensional Joint/Interface Element for Rough Undulating Major Discontinuities in Rock Masses
dc.typeJournal Paper
dc.journal.volume8
dc.journal.issue6
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)1532-3641(2008)8:6(327)
dc.treeInternational Journal of Geomechanics:;2008:;Volume ( 008 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record