Show simple item record

dc.contributor.authorAssaf Klar
dc.date.accessioned2017-05-08T21:32:05Z
dc.date.available2017-05-08T21:32:05Z
dc.date.copyrightMarch 2008
dc.date.issued2008
dc.identifier.other%28asce%291532-3641%282008%298%3A2%28162%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/55154
dc.description.abstractA new upper bound failure mechanism for the problem of rigid cylinder motion is presented. The velocity field associated with the mechanism is derived from a known elastic solution by similitude of the deformation field. The obtained upper bound value is 21% higher than the exact solution. However, the failure mechanism is continuous, involving no discontinuity, not even on the cylinder perimeter. The solution has a certain advantage if one, for example, wishes to combine its mechanism with a strain path approach to investigate the T-bar penetration problem. The absence of discontinuities in the mechanism also allows evolution of deformation under serviceability conditions, by associating a mobilized strength as a function of an average strain. Based on this approach, a load transfer function for lateral loading of piles in an undrained clay is suggested. This load transfer function involves nonlinear scaling of a stress-strain curve obtained from a triaxial compression test. An analytical, closed form, solution is given for the case of a hyperbolic stress-strain curve.
dc.publisherAmerican Society of Civil Engineers
dc.titleUpper Bound for Cylinder Movement Using “Elastic” Fields and Its Possible Application to Pile Deformation Analysis
dc.typeJournal Paper
dc.journal.volume8
dc.journal.issue2
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)1532-3641(2008)8:2(162)
dc.treeInternational Journal of Geomechanics:;2008:;Volume ( 008 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record