Show simple item record

dc.contributor.authorM. U. Holloway-Strong
dc.contributor.authorS. J. Hughes
dc.contributor.authorE. E. Hellawell
dc.date.accessioned2017-05-08T21:32:04Z
dc.date.available2017-05-08T21:32:04Z
dc.date.copyrightNovember 2007
dc.date.issued2007
dc.identifier.other%28asce%291532-3641%282007%297%3A6%28403%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/55129
dc.description.abstractWhen strong rock masses, with discontinuity patterns parallel and perpendicular to the ground surface, are subjected to normal loads, linear or concave stress-deformation curves are produced. In contrast, chalk rock masses with the same discontinuity pattern, produce convex curves. This paper investigates the underlying mechanisms, which may be responsible for such differences. Experimental results are presented for profiled chalk specimens in which the contact area at the discontinuity boundary is approximately 15% of the specimen cross-sectional area. It was found that these low contact area specimens exhibited both concave and convex behavior. This behavior was attributed to discontinuity closure and yielding of the intact material, respectively. The overall trend in behavior was found to be a function of the contact area at the discontinuity boundary, the initial discontinuity aperture, and the yield stress.
dc.publisherAmerican Society of Civil Engineers
dc.titleStress-Deformation Behavior of Chalk
dc.typeJournal Paper
dc.journal.volume7
dc.journal.issue6
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)1532-3641(2007)7:6(403)
dc.treeInternational Journal of Geomechanics:;2007:;Volume ( 007 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record