Show simple item record

dc.contributor.authorS. N. Shoukry
dc.contributor.authorM. Fahmy
dc.contributor.authorJ. Prucz
dc.contributor.authorG. William
dc.date.accessioned2017-05-08T21:32:00Z
dc.date.available2017-05-08T21:32:00Z
dc.date.copyrightJanuary 2007
dc.date.issued2007
dc.identifier.other%28asce%291532-3641%282007%297%3A1%2816%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/55085
dc.description.abstractThe response of dowel jointed concrete pavements to the combined effect of nonlinear thermal gradient and moving axle load is examined using three-dimensional finite-element (3DFE) modeling. The 3DFE-computed response to moving axle load was field validated versus measured concrete slab response to a fully loaded moving dump truck. The 3DFE-predicted slab curling due to nonlinear thermal gradient through the slab thickness was validated versus: (1) corner-dowel bar bending as measured using instrumented dowel embedded in an instrumented rigid pavement section in West Virginia; and (2) Westergaard’s closed-form solution. The effects of slab thickness, slab length, axle loading position, and axle type on slab stresses are examined. It is shown that while a negative temperature gradient reduces the intensity of traffic-induced stresses, positive temperature gradient increases it several fold. Formulas are developed for the computation of the peak principal stresses due to the combined effect of tandem axle load and nonlinear thermal gradient.
dc.publisherAmerican Society of Civil Engineers
dc.titleValidation of 3DFE Analysis of Rigid Pavement Dynamic Response to Moving Traffic and Nonlinear Temperature Gradient Effects
dc.typeJournal Paper
dc.journal.volume7
dc.journal.issue1
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)1532-3641(2007)7:1(16)
dc.treeInternational Journal of Geomechanics:;2007:;Volume ( 007 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record