Show simple item record

dc.contributor.authorLei Wei
dc.contributor.authorMurad Y. Abu-Farsakh
dc.contributor.authorMehmet T. Tumay
dc.date.accessioned2017-05-08T21:31:50Z
dc.date.available2017-05-08T21:31:50Z
dc.date.copyrightSeptember 2005
dc.date.issued2005
dc.identifier.other%28asce%291532-3641%282005%295%3A3%28167%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/55008
dc.description.abstractA three-dimensional finite-element analysis was performed to analyze the effect of soil anisotropy on the inclined piezocone penetration test in normally consolidated clay. The piezocone penetration was numerically simulated based on a large strain formulation using the commercial finite-element code ABAQUS, and the anisotropic modified cam clay model (AMCCM) was chosen and implemented into ABAQUS through the user subroutine UMAT. For verification purposes, numerical simulations were first performed on previously conducted calibration chamber tests, and the predicted results were compared with the measured values. For different initial stress conditions and different penetration angles, the cone tip resistance profile; excess pore pressure profile at the cone tip; typical stress, strain and excess pore pressure distributions around the cone; and excess pore pressure dissipation at the cone tip are provided. This study shows that when the initial stress state is anisotropic, the soil behavior is different under different angles of penetration.
dc.publisherAmerican Society of Civil Engineers
dc.titleFinite-Element Analysis of Inclined Piezocone Penetration Test in Clays
dc.typeJournal Paper
dc.journal.volume5
dc.journal.issue3
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)1532-3641(2005)5:3(167)
dc.treeInternational Journal of Geomechanics:;2005:;Volume ( 005 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record