Show simple item record

dc.contributor.authorD. Léonard
dc.contributor.authorA. Vanelstraete
dc.contributor.authorS. Parewyck
dc.date.accessioned2017-05-08T21:31:43Z
dc.date.available2017-05-08T21:31:43Z
dc.date.copyrightJuly 2002
dc.date.issued2002
dc.identifier.other%28asce%291532-3641%282002%292%3A3%28291%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54912
dc.description.abstractThis article deals with the structural design of flexible pavements reinforced by steel nettings. The purpose is to estimate the gain in base material obtained by using such systems. Most of the current pavement design methods are modeling the reinforcing system as a continuous layer. This approach is leading to cost‐ineffective solutions. To overcome these present limitations, a three‐dimensional (3D) finite element modeling (FEM) approach is suggested. The application of 3D‐FEM allows simulation of the real shape of steel reinforcing nettings. To cover as many practical cases as possible, various pavements are considered, defined by various base thicknesses and soil bearing capacities. Structures with and without base reinforcement system are compared in terms of asphalt fatigue, rutting, and deflection performance. These comparisons make it possible to draw several design charts for various asphalt thicknesses and soil bearing capacities. Such design charts will avoid time‐consuming computations with 3D‐FEM applications and provide project engineers with more cost‐effective solutions.
dc.publisherAmerican Society of Civil Engineers
dc.titleStructural Design of Flexible Pavements Using Steel Netting as Base Reinforcement
dc.typeJournal Paper
dc.journal.volume2
dc.journal.issue3
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)1532-3641(2002)2:3(291)
dc.treeInternational Journal of Geomechanics:;2002:;Volume ( 002 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record