Show simple item record

dc.contributor.authorRonald Blab
dc.contributor.authorJohn T. Harvey
dc.date.accessioned2017-05-08T21:31:43Z
dc.date.available2017-05-08T21:31:43Z
dc.date.copyrightJuly 2002
dc.date.issued2002
dc.identifier.other%28asce%291532-3641%282002%292%3A3%28271%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54911
dc.description.abstractThree‐dimensional (3D) contact stresses occurring between the road surface and the tire that were measured with the South African Vehicle Road Surface Pressure Transducer Array (VRSPTA) device under a moving wheel are transformed to a corresponding force/stress pattern representing the actual contact stress state under the tire by means of a software program. In combination with a dynamic load function such force patterns derived from these Stress‐in‐Motion (SIM) measurements with the VRSPTA device are used to introduce a more advanced load representation of the tire‐pavement interface into a three‐dimensional (3D) finite element (FE) model. Further, a method is presented to derive viscoelastic material properties of asphalt concrete (AC) mixes from dynamic frequency sweep shear (FS‐S) tests of lab specimens or field cores that can be used to define material behavior of the AC layers in the 3D FE pavement model. Linear elastic layered theory is utilized to validate the results of the FE computations in order to demonstrate that the FE method can successfully be used to include SIM measurements for more advanced analysis and design of pavements. First results of the 3D FE simulation of a load circle of the Heavy Vehicle Simulator (HVS) during accelerated pavement testing of a pavement test section are presented. These results encourage employment of the FE pavement model for further simulation work to assess the rutting potential of AC mixes in combination with different tire types and loading situations.
dc.publisherAmerican Society of Civil Engineers
dc.titleModeling Measured 3D Tire Contact Stresses in a Viscoelastic FE Pavement Model
dc.typeJournal Paper
dc.journal.volume2
dc.journal.issue3
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)1532-3641(2002)2:3(271)
dc.treeInternational Journal of Geomechanics:;2002:;Volume ( 002 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record