Show simple item record

dc.contributor.authorQinxi Dong
dc.contributor.authorKunihito Matsui
dc.contributor.authorKazuya Yamamoto
dc.date.accessioned2017-05-08T21:31:40Z
dc.date.available2017-05-08T21:31:40Z
dc.date.copyrightJuly 2001
dc.date.issued2001
dc.identifier.other%28asce%291532-3641%282001%291%3A3%28325%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54888
dc.description.abstractThe three‐dimensional finite element (3D FE) methods have been used increasingly to evaluate the bearing capacity of pavement structures. In this evaluation, layer moduli are backcalculated from measured surface deflections of the pavement structure. However, backcalculation requires repetitive computation to improve the parameter values in an iterative manner, and thus it is time consuming when 3D finite elements are used for the analysis. In this article, an effective method is developed to estimate layer moduli and damping coefficients in the time domain. The pavement is modeled using 3D finite elements. Gauss‐Newton and singular value decomposition methods are employed to backcalculate the unknown parameters. Ritz vectors are used to reduce the size of the matrices required for the analysis. Numerical simulations verify the effectiveness and accuracy of the Ritz vector method.
dc.publisherAmerican Society of Civil Engineers
dc.titleTime Domain Backcalculation of Pavement Structure Material Properties Using 3D FEM with Ritz Vectors
dc.typeJournal Paper
dc.journal.volume1
dc.journal.issue3
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)1532-3641(2001)1:3(325)
dc.treeInternational Journal of Geomechanics:;2001:;Volume ( 001 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record