Show simple item record

dc.contributor.authorDavid R. Brill
dc.contributor.authorI. Dennis Parsons
dc.date.accessioned2017-05-08T21:31:40Z
dc.date.available2017-05-08T21:31:40Z
dc.date.copyrightJuly 2001
dc.date.issued2001
dc.identifier.other%28asce%291532-3641%282001%291%3A3%28273%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54884
dc.description.abstractThis paper discusses work being performed at the Federal Aviation Administration (FAA) Airport Technology R&D Branch in the development of a three‐dimensional finite element‐based airport pavement design procedure for rigid airport pavements. The structure of the pavement design procedure and the function of the finite element structural model within it are described. A major focus of current FAA research and development efforts is on reducing run time. A simplified, single‐slab mesh runs on a personal computer and returns a maximum edge stress in a fraction of the time required by the full nine‐slab mesh. Results are presented for the simplified mesh for various aircraft types and slab sizes and compared to the larger mesh. Two types of foundation models are considered to represent a subgrade of infinite depth. A subgrade model consisting of discrete springs at nodal points approximates the distributed spring (Winkler) foundation with subgrade modulus k used in Westergaard analysis. An alternative model makes use of infinite elements to represent a linear elastic foundation with elastic modulus E and Poisson’s ratio μ. Stress computations using both models show that the Winkler foundation model is significantly more sensitive to slab size than the infinite element model for dual‐tridem (six‐wheel) aircraft gear loads. In a recent project at the FAA Center of Excellence (COE) for Airport Pavement Research, the open source code software (Nike3D) used in the three‐dimensional finite element computations to include the infinite element formulation. The infinite element was implemented as a new material type applicable to standard eight‐node elements in the Nike3D element library.
dc.publisherAmerican Society of Civil Engineers
dc.titleThree‐Dimensional Finite Element Analysis in Airport Pavement Design
dc.typeJournal Paper
dc.journal.volume1
dc.journal.issue3
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)1532-3641(2001)1:3(273)
dc.treeInternational Journal of Geomechanics:;2001:;Volume ( 001 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record