Show simple item record

dc.contributor.authorMoataz Badawi
dc.contributor.authorKhaled Soudki
dc.date.accessioned2017-05-08T21:31:13Z
dc.date.available2017-05-08T21:31:13Z
dc.date.copyrightOctober 2009
dc.date.issued2009
dc.identifier.other%28asce%291090-0268%282009%2913%3A5%28415%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54599
dc.description.abstractThis paper presents experimental results of reinforced concrete beams strengthened using near-surface mounted (NSM) carbon fiber-reinforced polymer (CFRP) reinforcement. A total of nine beam specimens were tested under fatigue loads. In addition, two specimens were tested for monotonic capacity. The beams were 3,500 mm long with a cross section of 254 mm deep by 152 mm wide. Different load ranges were considered in the fatigue tests to construct the fatigue life curves. The test results showed that under monotonic loading, the beam strengthened with NSM CFRP rod exhibited increases of 26 and 50% in the yield and ultimate load over the control beam, respectively. Under cyclic loading, the fatigue life for the strengthened beams was 24% higher than that of the control unstrengthened beams. An analytical model using sectional analysis and strain-life approach was developed to estimate the fatigue life of the specimens at various cyclic load ranges. A good agreement between the experimental results and analytical prediction of the fatigue life was obtained.
dc.publisherAmerican Society of Civil Engineers
dc.titleFatigue Behavior of RC Beams Strengthened with NSM CFRP Rods
dc.typeJournal Paper
dc.journal.volume13
dc.journal.issue5
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2009)13:5(415)
dc.treeJournal of Composites for Construction:;2009:;Volume ( 013 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record