Show simple item record

dc.contributor.authorErnesto Grande
dc.contributor.authorMaura Imbimbo
dc.contributor.authorAlessandro Rasulo
dc.date.accessioned2017-05-08T21:31:13Z
dc.date.available2017-05-08T21:31:13Z
dc.date.copyrightOctober 2009
dc.date.issued2009
dc.identifier.other%28asce%291090-0268%282009%2913%3A5%28405%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54598
dc.description.abstractThe present paper shows and discusses some of the results obtained within an experimental investigation carried out on 15 reinforced concrete (RC) beams strengthened in shear by externally bonded fiber-reinforced plastics (FRP) sheets. The aim of the study is to analyze the influence that the geometrical percentage of transverse steel reinforcement could have on the FRP resisting action. In particular, the objectives of the experimental campaign are to explore the possible interaction between FRP and steel transverse reinforcement resisting actions, analyzing the deformation behavior of the shear resisting system (FRP, transverse steel, and concrete) and the modes of failure of the strengthened and not strengthened beams. The results of the tests in terms of shear capacity are compared to the design formulations provided by the American Concrete Institute and the National Research Council of Italy code-format recommendations.
dc.publisherAmerican Society of Civil Engineers
dc.titleEffect of Transverse Steel on the Response of RC Beams Strengthened in Shear by FRP: Experimental Study
dc.typeJournal Paper
dc.journal.volume13
dc.journal.issue5
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2009)13:5(405)
dc.treeJournal of Composites for Construction:;2009:;Volume ( 013 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record