Show simple item record

dc.contributor.authorJason Cain
dc.contributor.authorScott Case
dc.contributor.authorJohn Lesko
dc.date.accessioned2017-05-08T21:31:12Z
dc.date.available2017-05-08T21:31:12Z
dc.date.copyrightAugust 2009
dc.date.issued2009
dc.identifier.other%28asce%291090-0268%282009%2913%3A4%28325%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54594
dc.description.abstractThis paper discusses the development of a novel test fixture for applying a uniform radial stress to cylindrical composite laminates in such a way as to eliminate bending moments and axial loads. This fixture requires the use of easily fabricated poly-tetrafluoroethylene (PTFE) ring seals. These seals, which fit just inside the composite sample, are designed to be internally pressurized in the fixture and expand outwards, applying a uniform radial load to the sample. The results of mechanics analyses of the PTFE ring seal and composite sample are presented, which estimate the radial stress applied to the composite sample as a fraction of the applied internal hydraulic pressure. Further, results are presented from a prolonged hygrothermal aging study, in which the E-glass/epoxy, cylindrically wound composite samples are aged under varying hygrothermal conditions (ambient dry; and 30, 40, and
dc.publisherAmerican Society of Civil Engineers
dc.titleTesting of Hygrothermally Aged E-Glass/Epoxy Cylindrical Laminates Using a Novel Fixture for Simulating Internal Pressure
dc.typeJournal Paper
dc.journal.volume13
dc.journal.issue4
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2009)13:4(325)
dc.treeJournal of Composites for Construction:;2009:;Volume ( 013 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record