Show simple item record

dc.contributor.authorMônica Garcez
dc.contributor.authorLeila Meneghetti
dc.contributor.authorLuiz Carlos da Silva Filho
dc.date.accessioned2017-05-08T21:31:08Z
dc.date.available2017-05-08T21:31:08Z
dc.date.copyrightOctober 2008
dc.date.issued2008
dc.identifier.other%28asce%291090-0268%282008%2912%3A5%28522%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54551
dc.description.abstractThe use of fiber-reinforced polymers (FRPs) to poststrengthen concrete structures started to be investigated in the mid-1970s and today is widely recognized as an attractive technique to be used in civil structures, especially when aggressive environments prevent the use of materials that are susceptible to corrosion, such as steel. Different FRP poststrengthening techniques have been developed and applied in existing structures, aiming to increase their load capacity. Most FRP systems used nowadays consist of carbon fibers embedded in epoxy matrix. Regardless of the advantages and the good results achieved using carbon fiber-reinforced polymers, some new possibilities, such as the use of prestressing and lower cost fiber materials, are being analyzed in an attempt to provide viable alternatives for a more efficient, safe, and rational use of FRP systems. The main purpose of the present work was to make a comparative analysis of the behavior of reinforced concrete beams poststrengthened with carbon, aramid, and glass FRP subjected to static loading tests. Experimental results were evaluated against theoretical ones obtained through an analytical model that considers a trilinear behavior for the load versus displacement curves. The experimental results indicate that all FRP systems applied have appropriate structural performance for use in poststrengthening applications of RC. The choice of the more suitable system would, therefore, be strongly influenced by circumstances regarding cost limitations and level of reinforcement required.
dc.publisherAmerican Society of Civil Engineers
dc.titleStructural Performance of RC Beams Poststrengthened with Carbon, Aramid, and Glass FRP Systems
dc.typeJournal Paper
dc.journal.volume12
dc.journal.issue5
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2008)12:5(522)
dc.treeJournal of Composites for Construction:;2008:;Volume ( 012 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record