Show simple item record

dc.contributor.authorJeremy A. Martin
dc.contributor.authorAnthony J. Lamanna
dc.date.accessioned2017-05-08T21:31:05Z
dc.date.available2017-05-08T21:31:05Z
dc.date.copyrightJune 2008
dc.date.issued2008
dc.identifier.other%28asce%291090-0268%282008%2912%3A3%28257%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54524
dc.description.abstractThe use of adhesively bonded fiber-reinforced polymer (FRP) materials has become widely accepted for use in flexural strengthening applications; however, the method of attachment presents drawbacks in application. These include extensive time and labor investments, as well as a tendency of the system to fail in a brittle manner. This paper presents a study of a series of reinforced concrete beams each strengthened in flexure with an FRP strip attached with large diameter concrete screws. The concrete screws were arranged in a variety of patterns. The effect of fastener number and spacing, as well as the effect of fastener pattern on the behavior of the beam, was investigated through the use of two groups of specimens. The beams in each group were tested to failure to verify the behavior of the strengthening system. Measured behavior was then used to determine an analytical approach for prediction of load response behavior of mechanically fastened systems. It was found that the strengthening method investigated improved the flexural capacity of the specimens 12 to 39% with little or no loss in ductility.
dc.publisherAmerican Society of Civil Engineers
dc.titlePerformance of Mechanically Fastened FRP Strengthened Concrete Beams in Flexure
dc.typeJournal Paper
dc.journal.volume12
dc.journal.issue3
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2008)12:3(257)
dc.treeJournal of Composites for Construction:;2008:;Volume ( 012 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record