Show simple item record

dc.contributor.authorM. N. Habeeb
dc.contributor.authorA. F. Ashour
dc.date.accessioned2017-05-08T21:31:03Z
dc.date.available2017-05-08T21:31:03Z
dc.date.copyrightApril 2008
dc.date.issued2008
dc.identifier.other%28asce%291090-0268%282008%2912%3A2%28115%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54510
dc.description.abstractThe results of testing two simply and three continuously supported concrete beams reinforced with glass fiber-reinforced polymer (GFRP) bars are presented. The amount of GFRP reinforcement was the main parameter investigated. Over and under GFRP reinforcements were applied for the simply supported concrete beams. Three different GFRP reinforcement combinations of over and under reinforcement ratios were used for the top and bottom layers of the continuous concrete beams tested. A concrete continuous beam reinforced with steel bars was also tested for comparison purposes. The experimental results revealed that over-reinforcing the bottom layer of either the simply or continuously supported GFRP beams is a key factor in controlling the width and propagation of cracks, enhancing the load capacity, and reducing the deflection of such beams. Comparisons between experimental results and those obtained from simplified methods proposed by the ACI 440 Committee show that ACI 440.1R-06 equations can reasonably predict the load capacity and deflection of the simply and continuously supported GFRP reinforced concrete beams tested.
dc.publisherAmerican Society of Civil Engineers
dc.titleFlexural Behavior of Continuous GFRP Reinforced Concrete Beams
dc.typeJournal Paper
dc.journal.volume12
dc.journal.issue2
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2008)12:2(115)
dc.treeJournal of Composites for Construction:;2008:;Volume ( 012 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record