Show simple item record

dc.contributor.authorYail J. Kim
dc.contributor.authorR. Gordon Wight
dc.contributor.authorMark F. Green
dc.date.accessioned2017-05-08T21:31:02Z
dc.date.available2017-05-08T21:31:02Z
dc.date.copyrightFebruary 2008
dc.date.issued2008
dc.identifier.other%28asce%291090-0268%282008%2912%3A1%2835%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54501
dc.description.abstractThis paper presents a novel anchoring technique for strengthening reinforced concrete beams with prestressed carbon fiber- reinforced polymer (CFRP) sheets. Permanent steel anchors are commonly used for the application of prestressed CFRP sheets. The steel anchors are, however, susceptible to corrosion and may not blend into the aesthetics of the original structure. As a result, it may be preferable to remove the steel anchors after transferring the required prestress to the structure with minimal losses of sustained prestress. A technique for replacing the steel anchors with nonmetallic anchors is investigated and reported herein. Nine doubly reinforced concrete beams are tested with various types of nonmetallic anchor systems such as nonanchored U-wraps, mechanically anchored U-wraps, and CFRP sheet-anchored U-wraps. The developed nonmetallic anchorages successfully transfer the sustained prestress in the CFRP sheets with insignificant prestress losses. A closed-form solution for the transfer of prestress is developed and compared to the experimental results.
dc.publisherAmerican Society of Civil Engineers
dc.titleFlexural Strengthening of RC Beams with Prestressed CFRP Sheets: Development of Nonmetallic Anchor Systems
dc.typeJournal Paper
dc.journal.volume12
dc.journal.issue1
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2008)12:1(35)
dc.treeJournal of Composites for Construction:;2008:;Volume ( 012 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record