Show simple item record

dc.contributor.authorDanielle D. Kleinhans
dc.contributor.authorJohn J. Myers
dc.contributor.authorAntonio Nanni
dc.date.accessioned2017-05-08T21:31:00Z
dc.date.available2017-05-08T21:31:00Z
dc.date.copyrightOctober 2007
dc.date.issued2007
dc.identifier.other%28asce%291090-0268%282007%2911%3A5%28545%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54477
dc.description.abstractA primary means of demonstrating the feasibility and effectiveness of fiber-reinforced polymer (FRP) composite bridge materials is via in situ bridge load testing. For this study, the prescribed or assumed design factors for each of the study bridges were compared to those exhibited by the performance of the bridge. Specifically, the wheel load distribution factors and impact factors as defined by AASHTO were considered in order to assess the load transfer and distribution in structures utilizing FRP panels. The in situ testing configurations for the study bridges are outlined, including the truck and instrumentation placement to obtain the desired information. Furthermore, comparisons were drawn between the design values for deflection and those experienced by the structures during testing. It was found that although the deflections exhibited by the bridges were well within the design limits, further research is needed to be able to prescribe bridge design factors for FRP panels.
dc.publisherAmerican Society of Civil Engineers
dc.titleAssessment of Load Transfer and Load Distribution in Bridges Utilizing FRP Panels
dc.typeJournal Paper
dc.journal.volume11
dc.journal.issue5
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2007)11:5(545)
dc.treeJournal of Composites for Construction:;2007:;Volume ( 011 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record