Show simple item record

dc.contributor.authorChristopher K. Y. Leung
dc.contributor.authorZhongfan Chen
dc.contributor.authorStephen Lee
dc.contributor.authorMandy Ng
dc.contributor.authorMing Xu
dc.contributor.authorJianmao Tang
dc.date.accessioned2017-05-08T21:30:59Z
dc.date.available2017-05-08T21:30:59Z
dc.date.copyrightOctober 2007
dc.date.issued2007
dc.identifier.other%28asce%291090-0268%282007%2911%3A5%28487%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54470
dc.description.abstractFiber reinforced plastics (FRP) are commonly used for the strengthening of concrete members. For shear strengthening of beams, FRP strips can be bonded to the sides of the member alone, to both the sides and the bottom (i.e., the U configuration), or wrapped around the whole beam. For the various strengthening configurations, empirical equations have been proposed for predicting the contribution of strips to the shear capacity of the member. However, for the same strengthened member, the equations recommended by different design guidelines (American Concrete Institute, International Federation for Structural Concrete, and Japan Society for Civil Engineers) predict different shear capacities. Moreover, as the equations were obtained through the fitting of laboratory data on relatively small beams, their applicability to beams of practical sizes have not really been assessed. In the present investigation, geometrically similar beams with depth of 180, 360, and
dc.publisherAmerican Society of Civil Engineers
dc.titleEffect of Size on the Failure of Geometrically Similar Concrete Beams Strengthened in Shear with FRP Strips
dc.typeJournal Paper
dc.journal.volume11
dc.journal.issue5
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2007)11:5(487)
dc.treeJournal of Composites for Construction:;2007:;Volume ( 011 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record