Show simple item record

dc.contributor.authorA. Al-Mayah
dc.contributor.authorK. Soudki
dc.contributor.authorA. Plumtree
dc.date.accessioned2017-05-08T21:30:59Z
dc.date.available2017-05-08T21:30:59Z
dc.date.copyrightOctober 2007
dc.date.issued2007
dc.identifier.other%28asce%291090-0268%282007%2911%3A5%28469%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54468
dc.description.abstractAn innovative wedge-anchor system with a longitudinal circular profile has been designed for gripping carbon-fiber-reinforced-polymer rods. The anchor system, consisting of a barrel, a number of wedges, and a sleeve, is capable of carrying the ultimate tensile strength of the rod. Three-dimensional (3D) and axisymmetric finite-element models have been developed and applied in order to determine the stresses inside the anchor system. Using the 3D model, the overall performance of the anchor represented by the tensile load-displacement relationship compared favorably with the experimental results. A comparison study between the 3D and axisymmetric models revealed that the axisymmetric model underestimated the contact pressure on the rod surface. Using the force-fitting principle of thick cylinders, a mathematical model was also developed, and under specific assumptions, the mathematical solution compared favorably with finite-element model results.
dc.publisherAmerican Society of Civil Engineers
dc.titleNovel Anchor System for CFRP Rod: Finite-Element and Mathematical Models
dc.typeJournal Paper
dc.journal.volume11
dc.journal.issue5
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2007)11:5(469)
dc.treeJournal of Composites for Construction:;2007:;Volume ( 011 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record