Show simple item record

dc.contributor.authorZhishen Wu
dc.contributor.authorYixin Shao
dc.contributor.authorKentaro Iwashita
dc.contributor.authorKoji Sakamoto
dc.date.accessioned2017-05-08T21:30:58Z
dc.date.available2017-05-08T21:30:58Z
dc.date.copyrightJune 2007
dc.date.issued2007
dc.identifier.other%28asce%291090-0268%282007%2911%3A3%28299%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54448
dc.description.abstractReinforced concrete (RC) beams subject to service loads of 40 or 60% of steel yielding were strengthened using hybrid continuous carbon fiber sheets. The hybrid systems were made of high-strength and high-modulus carbon sheets, and compared with systems using only high-strength carbon. It was found that the use of high-modulus carbon sheets in hybrid systems could increase the yielding load, the flexural stiffness, the postyielding ductility, and reduce the crack opening in concrete. The slope changes on load-deflection curves at steel yielding are not noticeable in hybrid systems. The tensile strains developed in hybrid sheets after the fracture of high-modulus carbon are higher in magnitude and distributed in a larger area, leading to an ultimate carbon fracture with concrete crushing. These unique features are attributed to the high stiffness and low ultimate tensile strain of the high-modulus carbon fibers which stiffen the structures, avoid or delay the fiber-reinforced polymer debonding, and facilitate the deformability during their subsequent breakdown.
dc.publisherAmerican Society of Civil Engineers
dc.titleStrengthening of Preloaded RC Beams Using Hybrid Carbon Sheets
dc.typeJournal Paper
dc.journal.volume11
dc.journal.issue3
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2007)11:3(299)
dc.treeJournal of Composites for Construction:;2007:;Volume ( 011 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record