Show simple item record

dc.contributor.authorRendy Thamrin
dc.contributor.authorTetsuzo Kaku
dc.date.accessioned2017-05-08T21:30:56Z
dc.date.available2017-05-08T21:30:56Z
dc.date.copyrightApril 2007
dc.date.issued2007
dc.identifier.other%28asce%291090-0268%282007%2911%3A2%28129%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54430
dc.description.abstractThis paper presents an experimental study on the bond behavior of longitudinal reinforcements in the hanging region (i.e., the part of the beam outside the support) of a simply supported reinforced concrete beam. Twenty-three reinforced concrete beams were tested to failure. Carbon fiber-reinforced polymer (CFRP) bars were used as longitudinal reinforcements in place of ordinary steel bars. The main test variables were (1) stirrup ratio in the hanging region; (2) stirrup ratio in the shear span; and (3) bond length in the hanging region. The test results showed that, even though the beam had a sufficient stirrup ratio in the shear span, bond-splitting failure occurred in the shear span of the beam with insufficient bond length in the hanging region. Based on the test results, the provision of ACI and AIJ codes on the additional anchorage length in the hanging region was evaluated, and a model for predicting tension force at the support was presented.
dc.publisherAmerican Society of Civil Engineers
dc.titleBond Behavior of CFRP Bars in Simply Supported Reinforced Concrete Beam with Hanging Region
dc.typeJournal Paper
dc.journal.volume11
dc.journal.issue2
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2007)11:2(129)
dc.treeJournal of Composites for Construction:;2007:;Volume ( 011 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record