Show simple item record

dc.contributor.authorMohamed A. ElGawady
dc.contributor.authorPierino Lestuzzi
dc.contributor.authorMarc Badoux
dc.date.accessioned2017-05-08T21:30:56Z
dc.date.available2017-05-08T21:30:56Z
dc.date.copyrightFebruary 2007
dc.date.issued2007
dc.identifier.other%28asce%291090-0268%282007%2911%3A1%2850%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54422
dc.description.abstractThe behavior of seven one-half scale masonry specimens before and after retrofitting using fiber-reinforced polymer (FRP) is investigated. Four walls were built using one-half scale hollow clay masonry units and weak mortar to simulate walls built in central Europe in the mid-20th century. Three walls were first tested as unreinforced masonry walls; then, the seismically damaged specimens were retrofitted using FRPs. The fourth wall was directly upgraded after construction using FRP. Each specimen was retrofitted on the entire surface of a single side. All the specimens were tested under constant gravity load and incrementally increasing in-plane loading cycles. The tested specimens had two effective moment/shear ratio, namely, 0.5 and 0.7. The key parameter was the amount of FRP axial rigidity, which is defined as the amount of FRP reinforcement ratio times its
dc.publisherAmerican Society of Civil Engineers
dc.titleStatic Cyclic Response of Masonry Walls Retrofitted with Fiber-Reinforced Polymers
dc.typeJournal Paper
dc.journal.volume11
dc.journal.issue1
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2007)11:1(50)
dc.treeJournal of Composites for Construction:;2007:;Volume ( 011 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record