Show simple item record

dc.contributor.authorYixin Shao
dc.contributor.authorJayasiri Shanmugam
dc.date.accessioned2017-05-08T21:30:55Z
dc.date.available2017-05-08T21:30:55Z
dc.date.copyrightDecember 2006
dc.date.issued2006
dc.identifier.other%28asce%291090-0268%282006%2910%3A6%28520%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54408
dc.description.abstractThe structural response of pultruded fiber-reinforced polymer (PFRP) sheet pile panels subjected to a uniform pressure load was investigated. Single, connected, and concrete-backfilled panels were tested to ultimate failure in an attempt to determine their moment capacities, deflection limits, and failure mechanisms. The load-carrying capacity of single-panel FRP piles was found to be 15% higher than that of three panels connected together. No pin and eye joint separation was observed at failure. The concrete backfilled hybrid panels exhibited significantly increased moment capacity. However, the increase in stiffness after the first concrete crack was, at best, only 76% over the pile without backfill. Bearing failure of a PFRP pile with a partially confined support created excessive deflection in the wall, but showed no significant reduction in the load capacity. On the other hand, with fully confined support, the ultimate failure of single, connected, and concrete-backfilled panels was dominated by local buckling, longitudinal tearing, and bearing crush at shear keys, upon reaching a deflection limit of span/50.
dc.publisherAmerican Society of Civil Engineers
dc.titleMoment Capacities and Deflection Limits of PFRP Sheet Piles
dc.typeJournal Paper
dc.journal.volume10
dc.journal.issue6
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2006)10:6(520)
dc.treeJournal of Composites for Construction:;2006:;Volume ( 010 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record