Show simple item record

dc.contributor.authorMahmut Ekenel
dc.contributor.authorAndrea Rizzo
dc.contributor.authorJohn J. Myers
dc.contributor.authorAntonio Nanni
dc.date.accessioned2017-05-08T21:30:54Z
dc.date.available2017-05-08T21:30:54Z
dc.date.copyrightOctober 2006
dc.date.issued2006
dc.identifier.other%28asce%291090-0268%282006%2910%3A5%28433%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54396
dc.description.abstractRehabilitation of existing structures with carbon fiber reinforced polymers (CFRP) has been growing in popularity because they offer resistance to corrosion and a high stiffness-to-weight ratio. This paper presents the flexural strengthening of seven reinforced concrete (RC) beams with two FRP systems. Two beams were maintained as unstrengthened control samples. Three of the RC beams were strengthened with CFRP fabrics, whereas the remaining two were strengthened using FRP precured laminates. Glass fiber anchor spikes were applied in one of the CFRP fabric strengthened beams. One of the FRP precured laminate strengthened beams was bonded with epoxy adhesive and the other one was attached by using mechanical fasteners. Five of the beams were tested under fatigue loading for two million cycles. All of the beams survived fatigue testing. The results showed that use of anchor spikes in fabric strengthening increase ultimate strength, and mechanical fasteners can be an alternative to epoxy bonded precured laminate systems.
dc.publisherAmerican Society of Civil Engineers
dc.titleFlexural Fatigue Behavior of Reinforced Concrete Beams Strengthened with FRP Fabric and Precured Laminate Systems
dc.typeJournal Paper
dc.journal.volume10
dc.journal.issue5
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2006)10:5(433)
dc.treeJournal of Composites for Construction:;2006:;Volume ( 010 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record