Show simple item record

dc.contributor.authorDwight D. Dempsey
dc.contributor.authorDavid W. Scott
dc.date.accessioned2017-05-08T21:30:54Z
dc.date.available2017-05-08T21:30:54Z
dc.date.copyrightOctober 2006
dc.date.issued2006
dc.identifier.other%28asce%291090-0268%282006%2910%3A5%28392%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54392
dc.description.abstractThe demand for a rapid technique to strengthen existing wood bridge structural elements is evident in military and civilian sectors. An experimental program was undertaken to evaluate the feasibility of increasing the flexural strength of Southern Pine wood members using mechanically fastened fiber-reinforced polymer (FRP) strips. Three control specimens and twelve composite members were fabricated using two FRP material types with varying fastener spacing and tested to failure. The experimental results show that the proposed strengthening technique induced a gradual failure of the composite members and increased ultimate moment, initial stiffness, and ductility over that found for the control specimens. Increased fastener spacing decreased member ultimate moment, initial stiffness, and ductility ratio. The moisture content of the wood material greatly affected the ductility ratio of the wood members.
dc.publisherAmerican Society of Civil Engineers
dc.titleWood Members Strengthened with Mechanically Fastened FRP Strips
dc.typeJournal Paper
dc.journal.volume10
dc.journal.issue5
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2006)10:5(392)
dc.treeJournal of Composites for Construction:;2006:;Volume ( 010 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record