Show simple item record

dc.contributor.authorS. P. Tastani
dc.contributor.authorS. J. Pantazopoulou
dc.date.accessioned2017-05-08T21:30:54Z
dc.date.available2017-05-08T21:30:54Z
dc.date.copyrightOctober 2006
dc.date.issued2006
dc.identifier.other%28asce%291090-0268%282006%2910%3A5%28381%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54391
dc.description.abstractThe local bond mechanics of glass-fiber reinforced polymer (GFRP) bars in normal strength concrete was investigated through experimental testing and analytical modeling. The experimental program was comprised of 30 direct tension pullout specimens with short anchorages. A novel test setup, specially designed so as to minimize the spurious influence of testing conditions on measured bond properties was adopted in the study. Parameters considered were the bar roughness and diameter, the size effect expressed by the constant cover to bar diameter ratio, and the external confining pressure exerted over the anchorage length by transverse externally bonded FRP sheets. Results of the study were summarized in the form of local bond-slip curves, whereby performance limit states were quantified by the amount of loaded end slip and bond strength. An analytical model of the bond stress-slip response of a GFRP bar was derived from first principles and calibrated against the test data of the present investigation. Using the calibrated model, design values for bond and slip were estimated with reference to the code limit state model for bond.
dc.publisherAmerican Society of Civil Engineers
dc.titleBond of GFRP Bars in Concrete: Experimental Study and Analytical Interpretation
dc.typeJournal Paper
dc.journal.volume10
dc.journal.issue5
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2006)10:5(381)
dc.treeJournal of Composites for Construction:;2006:;Volume ( 010 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record