Show simple item record

dc.contributor.authorJ. G. Teng
dc.contributor.authorL. De Lorenzis
dc.contributor.authorBo Wang
dc.contributor.authorRong Li
dc.contributor.authorT. N. Wong
dc.contributor.authorLik Lam
dc.date.accessioned2017-05-08T21:30:52Z
dc.date.available2017-05-08T21:30:52Z
dc.date.copyrightApril 2006
dc.date.issued2006
dc.identifier.other%28asce%291090-0268%282006%2910%3A2%2892%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54366
dc.description.abstractThis paper presents the results of a series of tests conducted on reinforced concrete (RC) beams strengthened in flexure with near surface mounted (NSM) carbon fiber-reinforced polymer (CFRP) strips. As the main focus of the research is on debonding failure mechanisms, the only test variable investigated was the embedment length of the NSM strip and the NSM strip was extensively strain-gauged to monitor its bond behavior. Load-deflection curves, failure modes, strain distributions in the CFRP strip, and local bond stresses at the CFRP–epoxy interface from the tests are all examined in detail and compared with the predictions of a simple analytical model where appropriate. Of the four embedment lengths investigated, all but the shortest one led to a notable increase in the load-carrying capacity and, to a lesser extent, in the postcracking stiffness of the beam. Debonding was found to be the primary failure mode in all cases except for the beam with the longest embedment length. Also reported in this paper are results from preliminary bond tests used to characterize the local bond-slip behavior of the NSM system. Apart from gaining a better understanding of debonding failures in RC beams with NSM FRP strips, the test results reported in the paper should be useful for future verification of numerical and analytical models.
dc.publisherAmerican Society of Civil Engineers
dc.titleDebonding Failures of RC Beams Strengthened with Near Surface Mounted CFRP Strips
dc.typeJournal Paper
dc.journal.volume10
dc.journal.issue2
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2006)10:2(92)
dc.treeJournal of Composites for Construction:;2006:;Volume ( 010 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record