Show simple item record

dc.contributor.authorI. S. Liu
dc.contributor.authorD. J. Oehlers
dc.contributor.authorR. Seracino
dc.date.accessioned2017-05-08T21:30:51Z
dc.date.available2017-05-08T21:30:51Z
dc.date.copyrightApril 2006
dc.date.issued2006
dc.identifier.other%28asce%291090-0268%282006%2910%3A2%28106%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54357
dc.description.abstractReinforced concrete beams are now commonly retrofitted using externally bonded (EB) fiber reinforced polymer (FRP) plates as the technique is both inexpensive and unobtrusive. However, tests have shown that EB carbon FRP plates tend to debond at low strains, which can severely limit the ductility or moment redistribution to such an extent that guidelines often preclude moment redistribution. This paper reports the moment redistribution achieved in tests on nine near full-scale two-span continuous reinforced concrete beams that were retrofitted with near-surface mounted (NSM) plates. The plates were either carbon FRP or high yield steel strips which were adhesively bonded within saw grooves cut into the concrete cover on the tension face or sides of the beam. It was found that the debonding strains of these NSM plates were considerably larger than those associated with EB plates and that substantial amounts of moment redistribution occurred. These tests suggest that NSM plates can be used to increase the strength of reinforced concrete structures with little, if any, loss of ductility.
dc.publisherAmerican Society of Civil Engineers
dc.titleTests on the Ductility of Reinforced Concrete Beams Retrofitted with FRP and Steel Near-Surface Mounted Plates
dc.typeJournal Paper
dc.journal.volume10
dc.journal.issue2
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2006)10:2(106)
dc.treeJournal of Composites for Construction:;2006:;Volume ( 010 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record