Show simple item record

dc.contributor.authorAkhrawat Lenwari
dc.contributor.authorThaksin Thepchatri
dc.contributor.authorPedro Albrecht
dc.date.accessioned2017-05-08T21:30:51Z
dc.date.available2017-05-08T21:30:51Z
dc.date.copyrightFebruary 2006
dc.date.issued2006
dc.identifier.other%28asce%291090-0268%282006%2910%3A1%2869%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54354
dc.description.abstractThis paper addresses the debonding strength of partial-length, adhesively bonded carbon fiber-reinforced polymer (CFRP) plates that are used to strengthen steel beams. Bonded CFRP plates tend to debond under static and fatigue loadings because of the very high stress field at the plate end. Such failures limit the application of CFRP plates. Static and fatigue tests show that the stress intensity factor governs the debonding strength. The steel/adhesive corner was the locus of debond initiation. The effects of the following parameters on stress intensity factors are discussed: plate thickness, plate modulus, bondline thickness, adhesive modulus, and adhesive spew-fillet angle. The stress intensity factors are calculated using the Betti’s law-based reciprocal work contour integral method (RWCIM). The parametric study results indicate that the stress intensity factors cannot be used to represent the severity of the corner as the adhesive spew-fillet angle (and singularity) changes. Therefore, the use of stress intensity factors as a failure criterion for the purpose of predicting debonding strength is limited to the same spew-fillet angle.
dc.publisherAmerican Society of Civil Engineers
dc.titleDebonding Strength of Steel Beams Strengthened with CFRP Plates
dc.typeJournal Paper
dc.journal.volume10
dc.journal.issue1
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2006)10:1(69)
dc.treeJournal of Composites for Construction:;2006:;Volume ( 010 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record