Show simple item record

dc.contributor.authorS. Y. Cao
dc.contributor.authorJ. F. Chen
dc.contributor.authorJ. G. Teng
dc.contributor.authorZ. Hao
dc.contributor.authorJ. Chen
dc.date.accessioned2017-05-08T21:30:47Z
dc.date.available2017-05-08T21:30:47Z
dc.date.copyrightOctober 2005
dc.date.issued2005
dc.identifier.other%28asce%291090-0268%282005%299%3A5%28417%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54328
dc.description.abstractSubstantial research has been conducted on the shear strengthening of reinforced concrete (RC) beams with bonded fiber reinforced polymer (FRP) strips. The beams may be strengthened in various ways: complete FRP wraps covering the whole cross section (i.e., complete wrapping), FRP U jackets covering the two sides and the tension face (i.e., U jacketing), and FRP strips bonded to the sides only (i.e., side bonding). Shear failure of such strengthened beams is generally in one of two modes: FRP rupture and debonding. The former mode governs in almost all beams with complete FRP wraps and some beams with U jackets, while the latter mode governs in all beams with side strips and U jackets. In RC beams strengthened with complete wraps, referred to as FRP wrapped beams, the shear failure process usually starts with the debonding of FRP from the sides of the beam near the critical shear crack, but ultimate failure is by rupture of the FRP. Most previous research has been concerned with the ultimate failure of FRP wrapped beams when FRP ruptures. However, debonding of FRP from the sides is at least a serviceability limit state and may also be taken as the ultimate limit state. This paper presents an experimental study on this debonding failure state in which a total of 18 beams were tested. The paper focuses on the distribution of strains in the FRP strips intersected by the critical shear crack, and the shear capacity at debonding. A simple model is proposed to predict the contribution of FRP to the shear capacity of the beam at the complete debonding of the critical FRP strip.
dc.publisherAmerican Society of Civil Engineers
dc.titleDebonding in RC Beams Shear Strengthened with Complete FRP Wraps
dc.typeJournal Paper
dc.journal.volume9
dc.journal.issue5
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2005)9:5(417)
dc.treeJournal of Composites for Construction:;2005:;Volume ( 009 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record