Show simple item record

dc.contributor.authorA. Ghobarah
dc.contributor.authorT. El-Amoury
dc.date.accessioned2017-05-08T21:30:47Z
dc.date.available2017-05-08T21:30:47Z
dc.date.copyrightOctober 2005
dc.date.issued2005
dc.identifier.other%28asce%291090-0268%282005%299%3A5%28408%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54327
dc.description.abstractThe performance of rehabilitated reinforced concrete beam-column joints was compared with the response of existing joints designed to preseismic codes to assess proposed rehabilitation techniques. Six beam-column subassemblies with nonductile reinforcement detailing were tested. The joints were subjected to quasi-static load that simulates seismic forces. The first three specimens had inadequate anchorage length of the bottom beam bars. Two of them were strengthened by using carbon-fiber-reinforced polymer sheets attached to the bottom beam face and then tested. The other three specimens had no steel ties installed in the joint zone, in addition to inadequate anchorage length of the beam bars. Two of the beam-column joints were strengthened by glass-fiber-reinforced polymer jackets of the joint zone and steel rods or plates. The rehabilitation techniques were found effective in eliminating the brittle joint shear and steel bar bond-slip failure modes, and ductile beam hinging instead occurred.
dc.publisherAmerican Society of Civil Engineers
dc.titleSeismic Rehabilitation of Deficient Exterior Concrete Frame Joints
dc.typeJournal Paper
dc.journal.volume9
dc.journal.issue5
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2005)9:5(408)
dc.treeJournal of Composites for Construction:;2005:;Volume ( 009 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record