Show simple item record

dc.contributor.authorChing Au
dc.contributor.authorOral Buyukozturk
dc.date.accessioned2017-05-08T21:30:47Z
dc.date.available2017-05-08T21:30:47Z
dc.date.copyrightOctober 2005
dc.date.issued2005
dc.identifier.other%28asce%291090-0268%282005%299%3A5%28397%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54326
dc.description.abstractThis paper explores the effects of fiber orientation and ply mix on load–deformation behavior and failure modes of fiber reinforced polymer (FRP) confined concrete by testing under uniaxial compression a designed array of plain concrete cylinders wrapped with different fabric orientation. Depending on the jacket confinement stiffness, either a strain hardening or a strain softening behavior was observed beyond the kink point where there was a sharp reduction in slope in the load–deformation curve. Kinking was seen to have a definable graphical relationship with the critical concrete lateral strain while the kink stress was found to upshift with increasing jacket stiffness. It is concluded that while hoop fiber wrapped concrete leads to brittle failures, angular fiber wrapped concrete tends to fail in a ductile manner, attributed to a fiber reorientation mechanism. Ply mix sequence plays an important role in the overall deformation and failure behavior. Existing models are found to be adequate in describing load–deformation behavior of angular fiber wrapped concrete as long as equivalent FRP properties in the hoop direction are used.
dc.publisherAmerican Society of Civil Engineers
dc.titleEffect of Fiber Orientation and Ply Mix on Fiber Reinforced Polymer-Confined Concrete
dc.typeJournal Paper
dc.journal.volume9
dc.journal.issue5
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2005)9:5(397)
dc.treeJournal of Composites for Construction:;2005:;Volume ( 009 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record