Show simple item record

dc.contributor.authorAkhrawat Lenwari
dc.contributor.authorThaksin Thepchatri
dc.contributor.authorPedro Albrecht
dc.date.accessioned2017-05-08T21:30:46Z
dc.date.available2017-05-08T21:30:46Z
dc.date.copyrightAugust 2005
dc.date.issued2005
dc.identifier.other%28asce%291090-0268%282005%299%3A4%28296%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54315
dc.description.abstractThis paper presents the flexural behavior of rolled steel beams that were strengthened with partial-length, adhesive-bonded carbon fiber-reinforced polymer (CFRP) plates. The hybrid beams had two types of failure mode, depending on the length of the plate: (1) plate debonding in beams with short plates; and (2) plate rupture at midspan in beams with long plates. The flexural behavior that was investigated includes the development of tensile stresses in the plate, the moment-curvature of the strengthened section, and the load-deflection of the strengthened beam. The analytical methods used include shear lag analysis, section analysis, and application of the virtual work principle. Agreement between the experimental results and the analytical predictions is discussed.
dc.publisherAmerican Society of Civil Engineers
dc.titleFlexural Response of Steel Beams Strengthened with Partial-Length CFRP Plates
dc.typeJournal Paper
dc.journal.volume9
dc.journal.issue4
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2005)9:4(296)
dc.treeJournal of Composites for Construction:;2005:;Volume ( 009 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record