Show simple item record

dc.contributor.authorA. Al-Mayah
dc.contributor.authorK. Soudki
dc.contributor.authorA. Plumtree
dc.date.accessioned2017-05-08T21:30:46Z
dc.date.available2017-05-08T21:30:46Z
dc.date.copyrightAugust 2005
dc.date.issued2005
dc.identifier.other%28asce%291090-0268%282005%299%3A4%28289%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54314
dc.description.abstractThis paper presents the results of a study that was conducted on the sliding behavior of a carbon-fiber-reinforced polymer rod in contact with copper or aluminum sleeves simulating the components of a wedge anchor system. The influence of sandblasting the metal sleeves was related to the displacement and shear stress of the couple for different contact pressures. In general, the interfacial shear stress was found to increase linearly with contact pressure. However, the highest interfacial shear stresses were recorded when sandblasted soft annealed sleeves were used. This effect was the result of a larger contact area which increased the strength of the interface.
dc.publisherAmerican Society of Civil Engineers
dc.titleEffect of Sandblasting on Interfacial Contact Behavior of Carbon-Fiber-Reinforced Polymer-Metal Couples
dc.typeJournal Paper
dc.journal.volume9
dc.journal.issue4
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2005)9:4(289)
dc.treeJournal of Composites for Construction:;2005:;Volume ( 009 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record