Show simple item record

dc.contributor.authorTheofanis D. Krevaikas
dc.contributor.authorThanasis C. Triantafillou
dc.date.accessioned2017-05-08T21:30:44Z
dc.date.available2017-05-08T21:30:44Z
dc.date.copyrightApril 2005
dc.date.issued2005
dc.identifier.other%28asce%291090-0268%282005%299%3A2%28128%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54296
dc.description.abstractThe application of fiber-reinforced polymer (FRP) as a means of increasing the axial capacity of masonry through confinement, a subject not addressed before, is investigated in this study. Four series of uniaxial compression tests, with a total of 42 specimens, were conducted on model masonry columns with these variables: number of layers, radius at the corners, cross-section aspect ratio, and type of fibers. It is concluded that, in general, FRP-confined masonry behaves very much like FRP-confined concrete. Confinement increases both the load-carrying capacity and the deformability of masonry almost linearly with the average confining stress. The uniaxial compression test results enabled the development of a simple confinement model for strength and ultimate strain of FRP-confined masonry. This model is consistent with the test results obtained here but should attract further experimental verification in the future to account for types of masonry materials other than those used in this study.
dc.publisherAmerican Society of Civil Engineers
dc.titleMasonry Confinement with Fiber-Reinforced Polymers
dc.typeJournal Paper
dc.journal.volume9
dc.journal.issue2
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2005)9:2(128)
dc.treeJournal of Composites for Construction:;2005:;Volume ( 009 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail
This item appears in the following Collection(s)

Show simple item record