Show simple item record

dc.contributor.authorM. A. Rashid
dc.contributor.authorM. A. Mansur
dc.contributor.authorP. Paramasivam
dc.date.accessioned2017-05-08T21:30:44Z
dc.date.available2017-05-08T21:30:44Z
dc.date.copyrightApril 2005
dc.date.issued2005
dc.identifier.other%28asce%291090-0268%282005%299%3A2%28117%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54295
dc.description.abstractFlexural test results of ten high strength concrete beams reinforced with aramid fiber-reinforced polymer (AFRP) bars together with a steel-reinforced beam that served as a reference are presented and discussed. All beams were tested under third-point loading. Test results have shown that a concrete beam, when reinforced with AFRP bars, becomes more flexible in the postcracking range than an equivalent steel-reinforced beam, demonstrates wider and predominantly vertical cracks even in the shear span, and may fail in an unusual flexure-shear mode. Major critical issues concerning flexural designs of AFRP-reinforced beams have been discussed in the perspective of code provisions, and suitable recommendations are made for practical design. A method has been suggested to provide a meaningful quantification of ductility for FRP-reinforced beams. Also the need for reducing the maximum spacing of stirrups from that specified in the current code provisions for sections subjected to large shear combined with significant bending moment has been identified and recommendations are made.
dc.publisherAmerican Society of Civil Engineers
dc.titleBehavior of Aramid Fiber-Reinforced Polymer Reinforced High Strength Concrete Beams under Bending
dc.typeJournal Paper
dc.journal.volume9
dc.journal.issue2
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2005)9:2(117)
dc.treeJournal of Composites for Construction:;2005:;Volume ( 009 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record