Show simple item record

dc.contributor.authorAhmad A. Hamid
dc.contributor.authorWael W. El-Dakhakhni
dc.contributor.authorZeyad H. R. Hakam
dc.contributor.authorMohamed Elgaaly
dc.date.accessioned2017-05-08T21:30:43Z
dc.date.available2017-05-08T21:30:43Z
dc.date.copyrightFebruary 2005
dc.date.issued2005
dc.identifier.other%28asce%291090-0268%282005%299%3A1%2873%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54290
dc.description.abstractAn experimental investigation was conducted to study the in-plane behavior of face shell mortar bedded unreinforced masonry (URM) wall assemblages retrofitted with fiber-reinforced polymer (FRP) laminates. Forty-two URM assemblages were tested under different stress conditions present in masonry shear and infill walls. Tests included prisms loaded in compression with different bed joint orientation (on/off-axis compression), diagonal tension specimens, and specimens loaded under joint shear. The behavior of each specimen type is discussed with emphasis on modes of failure, strength and deformation characteristics. Results showed that the application of FRP laminates on URM has a great influence on strength, postpeak behavior, as well as altering failure modes and maintaining the specimen integrity. The retrofitted specimens reached compressive strength of 1.62–5.64 times that of their unretrofitted counterparts, depending on the bed joint orientation, and joint shear strength increased by eightfold.
dc.publisherAmerican Society of Civil Engineers
dc.titleBehavior of Composite Unreinforced Masonry–Fiber-Reinforced Polymer Wall Assemblages Under In-Plane Loading
dc.typeJournal Paper
dc.journal.volume9
dc.journal.issue1
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2005)9:1(73)
dc.treeJournal of Composites for Construction:;2005:;Volume ( 009 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record