| dc.contributor.author | Tim Stratford | |
| dc.contributor.author | Giovanni Pascale | |
| dc.contributor.author | Odine Manfroni | |
| dc.contributor.author | Barbara Bonfiglioli | |
| dc.date.accessioned | 2017-05-08T21:30:40Z | |
| dc.date.available | 2017-05-08T21:30:40Z | |
| dc.date.copyright | October 2004 | |
| dc.date.issued | 2004 | |
| dc.identifier.other | %28asce%291090-0268%282004%298%3A5%28434%29.pdf | |
| dc.identifier.uri | http://yetl.yabesh.ir/yetl/handle/yetl/54261 | |
| dc.description.abstract | This paper investigates strengthening masonry walls using glass-fiber reinforced polymer (GFRP) sheets. An experimental research program was undertaken. Both clay and concrete brick specimens were tested, with and without GFRP strengthening. Single-sided strengthening was considered, as it is often not practicable to apply the reinforcement to both sides of a wall. Static tests were carried out on six masonry panels, under a combination of vertical preload, and in-plane horizontal shear loading. The mechanisms by which load was carried were observed, varying from the initial, uncracked state, to the final, fully cracked state. The results demonstrate that a significant increase of the in-plane shear capacity of masonry can be achieved by bonding GFRP sheets to the surface of masonry walls. The experimental data were used to assess the effectiveness of the GFRP strengthening, and suggestions are made to allow the test results to be used in the design of sheet GFRP strengthening for masonry structures. | |
| dc.publisher | American Society of Civil Engineers | |
| dc.title | Shear Strengthening Masonry Panels with Sheet Glass-Fiber Reinforced Polymer | |
| dc.type | Journal Paper | |
| dc.journal.volume | 8 | |
| dc.journal.issue | 5 | |
| dc.journal.title | Journal of Composites for Construction | |
| dc.identifier.doi | 10.1061/(ASCE)1090-0268(2004)8:5(434) | |
| dc.tree | Journal of Composites for Construction:;2004:;Volume ( 008 ):;issue: 005 | |
| dc.contenttype | Fulltext | |