Show simple item record

dc.contributor.authorChristophe Deniaud
dc.contributor.authorJ. J. Roger Cheng
dc.date.accessioned2017-05-08T21:30:40Z
dc.date.available2017-05-08T21:30:40Z
dc.date.copyrightOctober 2004
dc.date.issued2004
dc.identifier.other%28asce%291090-0268%282004%298%3A5%28425%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54260
dc.description.abstractThis paper presents a simplified shear design method for reinforced concrete beams strengthened externally with fiber reinforced polymer (FRP) sheets. This design method combines both the strip method and the shear friction approach. The background of the strip method is presented in detail, including the interface shear strength curve, which is compared with some available bond test data found in the literature. A parametric study is performed to propose two simplified equations, which describe the FRP sheet contribution. This contribution is added to the discrete shear friction formulation and, by derivation, a continuous and simplified design equation is proposed. This method well describes the interaction between the concrete, the stirrups, and the FRP sheets. A variable concrete crack angle is used, which enhances the accuracy of the model. No iteration is required. The proposed design formulation gives conservative predictions with 35 experimental test results found in the literature.
dc.publisherAmerican Society of Civil Engineers
dc.titleSimplified Shear Design Method for Concrete Beams Strengthened with Fiber Reinforced Polymer Sheets
dc.typeJournal Paper
dc.journal.volume8
dc.journal.issue5
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2004)8:5(425)
dc.treeJournal of Composites for Construction:;2004:;Volume ( 008 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record