Show simple item record

dc.contributor.authorEhab El-Salakawy
dc.contributor.authorKhaled Soudki
dc.contributor.authorMaria Anna Polak
dc.date.accessioned2017-05-08T21:30:40Z
dc.date.available2017-05-08T21:30:40Z
dc.date.copyrightOctober 2004
dc.date.issued2004
dc.identifier.other%28asce%291090-0268%282004%298%3A5%28384%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54256
dc.description.abstractThe present work reports the test results of seven full-scale reinforced concrete slab-column edge connections strengthened against punching shear using different methods. In this study, three slabs contained openings in the vicinity of the column, and the other four were without openings. The dimensions of the slabs were 1,540×1,020×120 mm with square columns (250×250 mm). The openings in the specimens were square (150×150 mm) with the sides parallel to the sides of the column. The slabs were reinforced with an average reinforcement ratio of 0.75%. Except for the two reference slabs, two different strengthening techniques were considered. Technique I applies externally bonded fiber reinforced polymer (FRP) flexible sheets on the slab around the column in two schemes with one or two layers of FRP sheets glued to the tension face or both tension and compression faces of the slab. Both glass and carbon FRP sheets were considered. Technique II applies externally bonded FRP sheets using either the first or second scheme combined with installing steel bolts through holes across the slab thickness around the column. Based on the test results, it is concluded that the presence of FRP sheets and steel bolts substantially increased the punching capacity of the connections. Code design expressions were conservative in predicting the experimental results.
dc.publisherAmerican Society of Civil Engineers
dc.titlePunching Shear Behavior of Flat Slabs Strengthened with Fiber Reinforced Polymer Laminates
dc.typeJournal Paper
dc.journal.volume8
dc.journal.issue5
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2004)8:5(384)
dc.treeJournal of Composites for Construction:;2004:;Volume ( 008 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record