Show simple item record

dc.contributor.authorPaolo Foraboschi
dc.date.accessioned2017-05-08T21:30:37Z
dc.date.available2017-05-08T21:30:37Z
dc.date.copyrightJune 2004
dc.date.issued2004
dc.identifier.other%28asce%291090-0268%282004%298%3A3%28191%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54230
dc.description.abstractThis paper deals with masonry arches and vaults strengthened with surface fiber-reinforced polymer (FRP) reinforcement in the form of strips bonded at the extrados and/or intrados, considering strip arrangements that prevent hinged mode failure, so the possible failure modes are: (1) crushing, (2) sliding, (3) debonding, and (4) FRP rupture. Mathematical models are presented for predicting the ultimate load associated with each of such failure modes. This study has shown that the reinforced arch is particularly susceptible to failure by crushing, as a result of an ultimate compressive force being collected by a small fraction of the cross section. Failure by debonding at the intrados may also be an issue, especially in the case of weak masonry blocks or multiring brickwork arches. Failure by sliding has to be considered if the reinforcement is at the extrados and loading is considerably nonsymmetric.
dc.publisherAmerican Society of Civil Engineers
dc.titleStrengthening of Masonry Arches with Fiber-Reinforced Polymer Strips
dc.typeJournal Paper
dc.journal.volume8
dc.journal.issue3
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2004)8:3(191)
dc.treeJournal of Composites for Construction:;2004:;Volume ( 008 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record