Show simple item record

dc.contributor.authorDat Duthinh
dc.contributor.authorMonica Starnes
dc.date.accessioned2017-05-08T21:30:36Z
dc.date.available2017-05-08T21:30:36Z
dc.date.copyrightFebruary 2004
dc.date.issued2004
dc.identifier.other%28asce%291090-0268%282004%298%3A1%2859%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54215
dc.description.abstractSeven concrete beams reinforced internally with varying amounts of steel and externally with precured carbon fiber-reinforced polymer (FRP) plates applied after the concrete had cracked under service loads were tested under four-point bending. Strains measured along the beam depth allowed computation of the beam curvature in the constant moment region. Results show that FRP is very effective for flexural strengthening. As the amount of steel increases, the additional strength provided by the carbon FRP plates decreases. Compared to a beam reinforced heavily with steel only, beams reinforced with both steel and carbon have adequate deformation capacity, in spite of their brittle mode of failure. Clamping or wrapping of the ends of the precured FRP plate enhances the capacity of adhesively bonded FRP anchorage. Design equations for anchorage, allowable stress, ductility, and amount of reinforcement are discussed.
dc.publisherAmerican Society of Civil Engineers
dc.titleStrength and Ductility of Concrete Beams Reinforced with Carbon Fiber-Reinforced Polymer Plates and Steel
dc.typeJournal Paper
dc.journal.volume8
dc.journal.issue1
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2004)8:1(59)
dc.treeJournal of Composites for Construction:;2004:;Volume ( 008 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record