Show simple item record

dc.contributor.authorAna Lilia Orozco
dc.contributor.authorArup K. Maji
dc.date.accessioned2017-05-08T21:30:36Z
dc.date.available2017-05-08T21:30:36Z
dc.date.copyrightFebruary 2004
dc.date.issued2004
dc.identifier.other%28asce%291090-0268%282004%298%3A1%2852%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54214
dc.description.abstractA set of 30 concrete beams reinforced with carbon/epoxy FRP (fiber-reinforced plastic) and four reinforced with comparable size steel rebars were subjected to static bending tests. Adequate bond between the FRP and the concrete was obtained, due to the use of carbon fiber overwrap on the smooth pultruded FRP rods. With adequate bond, the large strain to failure (>2%) of the FRP determines the ductility and failure mode of the FRP reinforced beams. An analytical evaluation of the fracture energy in these experiments shows that there is ductility due to the large fraction of the total strain energy that is absorbed in the concrete, because of the formation of distributed cracking. Variations in overwrap configuration, addition of steel stirrups, addition of polypropylene fibers, and comparison with four beams reinforced with equivalent steel reinforcement were also analyzed.
dc.publisherAmerican Society of Civil Engineers
dc.titleEnergy Release in Fiber-Reinforced Plastic Reinforced Concrete Beams
dc.typeJournal Paper
dc.journal.volume8
dc.journal.issue1
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2004)8:1(52)
dc.treeJournal of Composites for Construction:;2004:;Volume ( 008 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record