| dc.contributor.author | Yeol Choi | |
| dc.contributor.author | Robert L. Yuan | |
| dc.date.accessioned | 2017-05-08T21:30:35Z | |
| dc.date.available | 2017-05-08T21:30:35Z | |
| dc.date.copyright | November 2003 | |
| dc.date.issued | 2003 | |
| dc.identifier.other | %28asce%291090-0268%282003%297%3A4%28356%29.pdf | |
| dc.identifier.uri | http://yetl.yabesh.ir/yetl/handle/yetl/54205 | |
| dc.description.abstract | This paper describes an experimental investigation into the time-dependent deformation of pultruded glass fiber reinforced polymer (GFRP) composite columns under an axial-compressive loading at the environmental controlling room with a constant temperature and relative humidity. Tests were conducted on two types of cross-sectional columns: closed-cross section such as square tube (box) and opened-cross section such as wide flange. Both types of columns were 1,200 mm in length, and had cross-sectional dimensions of 102 mm×102 mm and with a 6.4 mm thickness. A total of eight GFRP composite columns were tested at four different stress levels; 20, 30, 40, and 50% of the average ultimate compressive strength from the short-term column tests. The experiments were conducted for approximately 2,500 h with an individual hydraulic loading jack system. The test results indicate that Findley’s power law model can be successfully used to predict time-dependent deformation of GFRP composite columns, and the time-dependent compressive elastic modulus would be decreased as much as 30% of initial value over a 50-year period. | |
| dc.publisher | American Society of Civil Engineers | |
| dc.title | Time-Dependent Deformation of Pultruded Fiber Reinforced Polymer Composite Columns | |
| dc.type | Journal Paper | |
| dc.journal.volume | 7 | |
| dc.journal.issue | 4 | |
| dc.journal.title | Journal of Composites for Construction | |
| dc.identifier.doi | 10.1061/(ASCE)1090-0268(2003)7:4(356) | |
| dc.tree | Journal of Composites for Construction:;2003:;Volume ( 007 ):;issue: 004 | |
| dc.contenttype | Fulltext | |