Show simple item record

dc.contributor.authorChristophe Deniaud
dc.contributor.authorJ. J. Roger Cheng
dc.date.accessioned2017-05-08T21:30:35Z
dc.date.available2017-05-08T21:30:35Z
dc.date.copyrightNovember 2003
dc.date.issued2003
dc.identifier.other%28asce%291090-0268%282003%297%3A4%28302%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54199
dc.description.abstractThis research studies the interaction of concrete, steel stirrups, and external fiber reinforced polymer (FRP) sheets in carrying shear loads in reinforced concrete beams. A total of eight tests were conducted on four laboratory-controlled concrete T-beams. The beams were subjected to a four-point loading. Each end of each beam was tested separately. Three types of FRP, uniaxial glass fiber, uniaxial carbon fiber, and triaxial glass fiber, were applied externally to strengthen the web of the T-beams, while some ends were left without FRP. The test results show that FRP reinforcement increases the maximum shear strengths between 15.4 and 42.2% over beams with no FRP. The magnitude of the increased shear capacity is dependent not only on the type of FRP but also on the amount of internal shear reinforcement. The triaxial glass fiber reinforced beam exhibited more ductile failure than the other FRP reinforced beams. This paper also presents a test model that is based on a rational mechanism and can predict the experimental results with excellent accuracy.
dc.publisherAmerican Society of Civil Engineers
dc.titleReinforced Concrete T-Beams Strengthened in Shear with Fiber Reinforced Polymer Sheets
dc.typeJournal Paper
dc.journal.volume7
dc.journal.issue4
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2003)7:4(302)
dc.treeJournal of Composites for Construction:;2003:;Volume ( 007 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record