Show simple item record

dc.contributor.authorAmir M. Malek
dc.contributor.authorKalpesh Patel
dc.date.accessioned2017-05-08T21:30:31Z
dc.date.available2017-05-08T21:30:31Z
dc.date.copyrightMay 2002
dc.date.issued2002
dc.identifier.other%28asce%291090-0268%282002%296%3A2%2897%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54141
dc.description.abstractBonding composite laminates to the tension face can effectively increase the flexural strength of the reinforced-concrete flanged beams. In comparison to rectangular concrete beams, the flange provides a larger area of concrete to resist compression stresses, and considering the role of the composite in resisting tensile stresses, its addition to flanged beams can efficiently upgrade the flexural capacity. Failure of the strengthened beam may result from crushing of concrete or rupture of the plate; however, the beam must be properly detailed to avoid local shear failure at the plate cut-off point. In this paper, equations required for strengthening of the flanged beams for gravity loads will be presented. The equations have been developed based on load and resistance factor design, and have been verified through a comparison with available experimental results. Close agreement with the experimental results indicates the accuracy of the equations. Terms, definitions, and notations compatible to ordinary reinforced-concrete design codes have been used to facilitate the application of the equations.
dc.publisherAmerican Society of Civil Engineers
dc.titleFlexural Strengthening of Reinforced Concrete Flanged Beams with Composite Laminates
dc.typeJournal Paper
dc.journal.volume6
dc.journal.issue2
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2002)6:2(97)
dc.treeJournal of Composites for Construction:;2002:;Volume ( 006 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record