Show simple item record

dc.contributor.authorDai Minh Nguyen
dc.contributor.authorToong Khuan Chan
dc.contributor.authorHee Kiat Cheong
dc.date.accessioned2017-05-08T21:30:25Z
dc.date.available2017-05-08T21:30:25Z
dc.date.copyrightFebruary 2001
dc.date.issued2001
dc.identifier.other%28asce%291090-0268%282001%295%3A1%2812%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54079
dc.description.abstractThe performance of a series of 1.5 m-long reinforced concrete beams with CFRP plates bonded to the soffit is presented. Effects of the plate length, the reinforcing steel ratio, and the thickness of the concrete cover on behavior of the beams are discussed with particular emphasis on the brittle failure mode of the concrete ripping. It was found that before the brittle failure, the composite action of the beam could be divided into three distinct zones based on the distribution of the strains along the CFRP plate: (1) The “destressed” zone, (2) the “bond development” zone; and (3) the “fully composite” zone. Concrete ripping may be prevented by limiting the strain at the transition point of the composite zone of the plate. An analytical formulation to predict the failure load corresponding to the concrete ripping failure mode is proposed based on composite theory in combination with a strain limiting criterion. The strain limit can be determined based on simple bond tests with various bond lengths for a given CFRP and adhesive combination.
dc.publisherAmerican Society of Civil Engineers
dc.titleBrittle Failure and Bond Development Length of CFRP-Concrete Beams
dc.typeJournal Paper
dc.journal.volume5
dc.journal.issue1
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2001)5:1(12)
dc.treeJournal of Composites for Construction:;2001:;Volume ( 005 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record