Show simple item record

dc.contributor.authorJ. I. Velazquez-Dimas
dc.contributor.authorM. R. Ehsani
dc.date.accessioned2017-05-08T21:30:24Z
dc.date.available2017-05-08T21:30:24Z
dc.date.copyrightNovember 2000
dc.date.issued2000
dc.identifier.other%28asce%291090-0268%282000%294%3A4%28172%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54071
dc.description.abstractAlthough masonry is one of the oldest construction materials, its behavior has not been investigated as extensively as other construction materials. Out-of-plane failures are common in unreinforced masonry (URM) buildings constructed in seismic regions. Seven half-scale brick masonry walls were constructed, externally strengthened with vertical glass-fabric composite strips, and subjected to static cyclic out-of-plane loading. The flexural behavior of the tested specimens is characterized by three main stages corresponding to the first visible bed-joint crack, the first delamination, and the ultimate load. The main parameters being investigated in this study are the amount of composite, the height-to-thickness ratio
dc.publisherAmerican Society of Civil Engineers
dc.titleModeling Out-of-Plane Behavior of URM Walls Retrofitted with Fiber Composites
dc.typeJournal Paper
dc.journal.volume4
dc.journal.issue4
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2000)4:4(172)
dc.treeJournal of Composites for Construction:;2000:;Volume ( 004 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record