Show simple item record

dc.contributor.authorStijn Matthys
dc.contributor.authorLuc Taerwe
dc.date.accessioned2017-05-08T21:30:24Z
dc.date.available2017-05-08T21:30:24Z
dc.date.copyrightAugust 2000
dc.date.issued2000
dc.identifier.other%28asce%291090-0268%282000%294%3A3%28154%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/54068
dc.description.abstractThe use of fiber-reinforced polymer (FRP) grid reinforcement for concrete slabs has been investigated, considering the behavior of the slabs in one-way bending and under concentrated loading. The behavior under the latter loading type will be considered in this second part of a two-part paper. From the performed punching tests and the analysis, a fairly strong interaction between shear and flexural effects was noted for most of the tested slabs. For the FRP-reinforced slabs with an increased reinforcement ratio or an increased slab depth (needed to fulfill the serviceability criteria in bending), the punching strength was similar to or higher than the tested steel-reinforced reference slabs. For most slabs, slip of the bars occurred resulting in higher deflections at failure. The calculation of the punching failure load according to empirical-based models (from different codes), a modified mechanical model, and an analytical model is evaluated.
dc.publisherAmerican Society of Civil Engineers
dc.titleConcrete Slabs Reinforced with FRP Grids. II: Punching Resistance
dc.typeJournal Paper
dc.journal.volume4
dc.journal.issue3
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)1090-0268(2000)4:3(154)
dc.treeJournal of Composites for Construction:;2000:;Volume ( 004 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record